How can I find out where to buy a Luminox watch?
Please check the store locator to find authorised retailers in your county: https://www.luminox.com/service-und-support/store-locator.html
Where can I send my watch for repair?
Please check contact Saltzman at 401-946-0930 or email at firstname.lastname@example.org
How can I find out where to buy new bands/bracelets?
Please check contact Saltzman at 401-946-0930 or email at email@example.com
Where can I obtain an instruction manual?
Please download and fill out form here
How long is lifetime of my watch battery?
A battery life varies usually from two to ten years depending on the type of the watch, dimensions and capacity of the battery, the size and weight of hands, and the amount of energy required by the different functions of the movement. For instance, a chronograph will have a higher energy consumption than a watch indicating the hours and minutes only.
Some Luminox watches feature an end of life indicator: Once the second hands starts moving in 4-seconds intervals, it is time to have the battery replaced by a Luminox qualified watchmaker. However, even in the 4 seconds interval, your watch will continue to run for one to three weeks before stopping. Please note that the battery is not covered by the original warranty.
How frequently should my Luminox watch be serviced?
Like any high-precision instrument, a watch needs to be serviced regularly in order for it to work perfectly. Obviously, we cannot indicate the intervals for such servicing, given that it depends entirely on the model, climate and the care taken by the watch's owner. As a general rule, your watch should receive a full service every 3 to 4 years, depending on the use of the watch.
What does water resistant mean?
Luminox watches are water resistant from 100 – 500 meters, as indicated on the case back.
The water resistance rating of a watch does not take into account the ability of the watch to STAY water resistant as it ages. Please be aware that temperature fluctuations and external influences, for example due to solvents, cosmetics, dust or shocks, caused by impacts or sudden movements, can fundamentally affect water-resistance. Often a watch gets hit by a shock onto the crown or crystal without leaving visible marks, but the internal parts could become damaged and the watch will no longer be water resistant. You also need to consider that seals and sealing systems in particular are subject to wear and tear and natural ageing, e.g gaskets at the crystal, crown and case back.
Therefore, we suggest that before engaging in activities that could subject your watch to extraordinary stress (team sports, jumping into water from more then 3 feet/1 meter, deep diving, temperature shocks from hot sun to colder water, big wave surfing, etc), you are advised to remove your watch.
Please also note that not all straps or bracelets are suitable for use in or under water. Furthermore, with exception of the turning bezel, the moving parts of the watch (crown, buttons etc.) should not be operated under water. Before wearing the watch in or under water, you should also make sure that all moving parts are in their rest position, especially the screw-on crown must be firmly tight. After use in or under water, your watch should be rinsed with clear fresh water and then cleaned and dried.
Do not under any circumstances open the watch by yourself. The water resistance should be tested regularly, and at least annually, by an official Luminox agent.
Typically water-resistant watches are usually tested for water-resistance on the basis of international standards ISO 2281, and only especially constructed diver's watches (like Luminox series 1500) undergo much tougher testing procedures on the basis of international standard ISO 6425.. Our minimum water resistance recommendations are as follows for the following activities in water environments:
— splashing 3 ATM (30 meters)
— water surface activities 5 ATM (50 meters)
— swimming/snorkelling 10 ATM (100 meters)
— diving 20 ATM (200 meters)
— deep diving special testing procedure required according to ISO 6425
What is the accuracy of my Luminox watch?
The typical tolerance of a quartz movement has got variations of between -05. and +0.7 seconds per day. External influences like shocks or sudden change of temperature may affect the precision of quartz movements.
The accuracy of the watch depends on the movement and on the individual habits of the wearer and can therefore vary. The average precision tolerances are between -10/+40 seconds per day.
Can I wear my Luminox watch if I am allergic to Nickel?
The materials used by Luminox are subjected to severe tests in order to avoid allergies. For those who are hyper-sensitive to stainless steel we recommend that you buy a watch made of titanium or plastic.
What is the lifetime of my leather strap?
Depending on use and wear and tear, lifetime is typically from 6 to 18 months. Please take hygienic issue into consideration, as your leather strap is exposed daily to your natural sweat, as well as bacteria and dirt. Also from this point of view, a change of strap is recommended every 18 months at least.
What does the Luminox warranty cover?
Your watch is warranted for 2 years from the date of purchase from an authorized Luminox retailer against any and all manufacturer's defects. Any damage to the watch resulting from normal or extreme use is not covered under the original manufacturer's warranty. Items not covered by the original warranty are the battery, crystal, band, stem and crown, or any damage from normal, extreme, or inappropriate use.
Please consult your warranty card and booklet received from your retailer. When returning your watch to an official service center, please include the warranty card which must show the store where bought, date of purchase and stamp of the store in order to be a valid warranty card.
Watches not bought from an authorized Luminox retailer, therefore to be considered grey market store, may make your warranty void and you might be asked to pay even if the repair usually would be covered by the warranty.
How does the Luminox Light Technology work?
The Luminox illumination glass tubes, called LLT (LLT = Luminox Light Technology) inside your watch are calculated to glow up to 25 years, with a guarantee to glow 10 years as of date of purchase, except when exposed to strong shocks on the watch. Luminox – Always Visible.
Luminox watches offer a constant glow for up to 25 years, even in total darkness. Each Luminox watch employs tiny self-powered micro gas light tubes. These micro gas lights (borosilicate glass capsules) are installed in the hands, hour markers o the dial, and where applicable, into the bezels of our watches. These light tubes are safe to humans and environment.
Luminox watches need no external light source to “charge” the paint on the dial or hands in order to glow as do conventional luminous watches. Nor do they require a push of a button to light the dial as do watches with electro luminescence and therefore do not consume any battery power.
Which individuals and organizations carry Luminox watches?
Luminox watches are, to name but a few, requested and supplied to:
— U.S. Navy SEALs U.S.
— Air Force
— Heliswiss Switzerland
— Air Glacier, Switzerland
— Christoph 2 Rettungshubschrauber, Germany
— Brunei Government
— San Francisco and Las Vegas Police SWAT
— Bureau of Alcohol, Tobacco and Firearms (ATF)
— U.S. Border Patrol
— U.S. Coast Guard
— U.S. Special Forces
— U.S. Secret Service
— Federal Bureau of Investigation (FBI)
— Miami-Dade Special Response Team (SWAT)
— China SWAT team
— South Korea Air Force F-16
— Abu Dhabi Air Force Pilots F-16
— Canada Special Forces
— Several Hollywood movies such as Ocean's Eleven, Bad Boys, Next and many more
Where can I obtain a Luminox catalogue?
Every official Luminox representative will be glad to provide you with a catalogue. You can also download the PDF Version here.
Is it Normal for a Watch Crystal to fog up?
Luminox watches are produced in a clean room with a controlled relative air humidity of 45% to avoid condensation. However, under certain circumstances condensation can build up on the inside of the watch due to natural humidity.
This can happen if the watch is exposed to extremes of heat and cold in quick succession, e.g.
Exposed to the hot sun and then worn while swimming or in a cold shower, or falling while skiing and exposing the crystal to ice cold snow. As long as the fog is NOT caused by a leak due to shock or damage to the watch, the fog will dissipate when the watch is in a normal climate again.
If the does not disappear within 2 to 3 minutes in a normal temperature, send the watch to an authorized service center to address shock or damaged gaskets which can cause the loss of water resistance.